Re the R-89 check the loom from the the CCC to P205 on the mechanism control, remove each connection from the molex plug one pin at a time by pushing in the pawl and extracting the pin with a very small screw driver orcract knife.
#Rowe ami cd jukebox bubbler full#
You will see the gear assembly, scan has a spring attached to it, this gear under tention by the spring activates the switch to stop the scan after about a full revolution and a third.Ĭheck that this is working correctly and is activating the switch.
Re the MM-3 the problem may well be in the Scan Control Assembly 303-05111.Ĭheck out the miccro switch in this assembly, part number 200-10731. How should i proceed diagnostically? Thanks in advance for your help again! I also checked the 2-amp slo-blo fuse, which was good. Since I had it apart, I went ahead and cleaned the relays again with a paper taper. If I activate what I think is the Detent Solenoid, the magazine will begin scanning, but I have to manually hold the transfer arm shoe in to keep it from rubbing the records.Īfter reading through my manual, I thought this might be a symptom of a bad cam microswitch, but they all tested good (or at least the resistance on the switches changed according to switch operation). I cannot visibly see any broken components. In more detail, specifically, when I turn my Jukebox on, the power activates and the transfer motor cam attempts to move and then seems to bind and the machine buzzes. It's sort of like the jukebox is stuck on this one step and won't move forward with operation. I cleared the record but the transfer arm will not release (meaning the shoe does not retract) to allow the magazine to scan. A record didn't set down correctly and as the transfer arm went to place it back in the magazine, it jammed. You helped me get my 1963 Rowe AMI JAL-200 jukebox running earlier in the year and I'm afraid it stopped working and I could use your help again.
0 kommentar(er)
